We're ISO: we develop and publish International Standards. ISO creates documents that provide requirements, specifications, guidelines or characteristics that can be used consistently to ensure that materials, products, processes and services are fit for their purpose. Hp t5000 thin client manual. We've published 22805 International Standards, which you can buy from our members or the ISO Store. ISO 9001 ISO 1 ISO 22000 SA8000 ISO26000 FAMI-QS ISO 27001 IATF16949, 22301 IRIS Management system Series of Standards / Documents published.
- Iso Standards List In India
- Iso Standards 2019
- Types Of Iso Certifications
- Current Iso Standards List
list of standards
list of standards
hello guys
this are some applicable standards as tips however this document is old a decade! but may be helpful. just shearing.
Engineering Rocks!!!
1.0 LIST OF STANDARDS ORGANIZATIONS BY EQUIPMENT CATEGORIES
1.1 GENERAL
1.2 SAFETY
1.3 VESSELS - TANKS
1.4 HEAT TRANSFER EQUIPMENT
1.5 ROTATING EQUIPMENT
1.6 PROCESS EQUIPMENT
1.7 MATERIAL HANDLING
1.8 GENERAL SERVICES
1.9 PLANT SERVICES
1.10 BUILDING SERVICES
1.11 PLUMBING
1.12 PIPING
1.13 MISCELLANEOUS MATERIAL, WELDING, ETC.
2.0 LIST OF MAJOR CODES AND STANDARDS RELATED TO PROCESS ENGINEERING
2.1 ANSI
2.2 API
2.3 ASME
2.4 ASHRAE
2.5 AWWA
2.6 CEMA
2.7 CGSB
2.8 CSA
2.9 CTI
2.10 HYDRAULICS INSTITUTE
2.11 MSS
2.12 NACE
2.13 NEMA
2.14 NFPA
2.15 PFI
2.16 RMA
2.17 SSPC
2.18 TEMA
2.19 ULC
TABLE OF CONTENTS (CONTINUED)
2.20 ISA
2.21 ISO
2.22 OFFSHORE PIPELINE
2.23 UNITS OF MEASUREMENT
------------------------------------------------------------
1.0 LIST OF STANDARDS ORGANIZATIONS BY EQUIPMENT CATEGORIES
1.1 General
AGS American Gas Society
ANSI American National Standards Institute
BSI British Standards Institute
CGSB Canadian General Standards Board
CSA Canadian Standards Association
ISO International Organization for Standardization
NBS National Bureau of Standards
ISA Instrument Society of America
1.2 Safety
ANSI American National Standard Institute
Dept. of Labour
EPA Environment Protection Agency
FM Factory Mutual
NBFU National Board of Fire Underwriters
NFPA National Fire Protection Association
OSHA Occupational Safety and Health Administration
UL Underwriters' Laboratories
1.3 Vessels - Tanks
API American Petroleum Institute
ASME American Society of Mechanical Engineers
AWWA American Water Works Association
NBBI National Bureau of Boiler & Pressure Vessel Inspectors
ULC Underwriters' Laboratories of Canada
1.4 Heat Transfer Equipment
API American Petroleum Institute
CTI Cooling Tower Institute
TEMA Tubular Exchanger Manufacturers Association
1.5 Rotating Equipment
ANSI American National Standard Institute
API American Petroleum Institute
AWWA American Water Works Association
DEMA Diesel Engine Manufacturers Association
Hydraulics Institute
MPTA Mechanical Power Transmission Association
1.6 Process Equipment
AWWA American Water Works Association
GPSA Gas Processor Suppliers Association
API American Petroleum Institute
ASME American Society of Mechanical Engineers
ASTM American Society for Testing and Materials
ANSI American National Standards Institute
NBBI National Bureau of Boiler and Pressure Vessel Inspectors
CMAA Crane Equipment Manufacturers Association of America
1.7 Material Handling
CEMA Conveyor Equipment Manufacturers Association
CMAA Crane Equipment Manufacturers Association of America
CSA Canadian Standards Association
FEM Fédération Européenne de la Manutention (Rules for the Design of Hoisting Appliances)
MHI Material Handling Institute
RMA Rubber Manufacturers Association
1.8 General Services
SAMA Scientific Apparatus Makers Association
1.9 Plant Services
ACGIH American Conference of Governmental Industrial Hygienists
AGA American Gas Association
AWWA American Water Works Association
CAGI Compressed Air and Gas Institute
CGA Canadian Gas Association
CGA INC. Compressed Gas Association
1.10 Building Services
AMCA Air Moving and Conditioning Association
ARI Air-Conditioning and Refrigeration Institute
ASHRAE American Society of Heating, Refrigerating and Air-Conditioning Engineers
1.11 Plumbing
ASPE American Society of Plumbing Engineers
ASSE American Society of Sanitary Engineers
- Canadian Plumbing Code
PDI Plumbing and Drainage Institute
- Provincial Plumbing Code
1.12 Piping
API American Petroleum Institute
ASME American Society of Mechanical Engineers
MSS Manufacturers Standardization Society of the Valve and Fittings Industry
PFI Pipe Fabricators Institute
PPI Plastic Pipe Institute
1.13 Miscellaneous Material, Welding, etc.
ASME American Society of Mechanical Engineers
ASTM American Society for Testing and Materials
TIMA Thermal Insulation Manufacturers Association
2.0 LIST OF MAJOR CODES AND STANDARDS RELATED TO PROCESS ENGINEERING
2.1 ANSI
A1 Liquefied Petroleum Gas System
A13.1 Scheme for Identification of Piping Systems
B.16.1 Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800
B.16.5 Pipe Flanges and Fittings
B16.9 Steel Buttwelding Fittings
B31 Corrosion Control for B31.1
B31.1 Power Piping
B31.2 Fuel Gas Piping
B31.3 Chemical Plant and Petroleum Refinery Piping
B31.4 Liquid Petroleum Transportation Piping Systems
B31.5 Refrigeration Piping
B31.8 Gas Transmission and Distribution Systems (1982)
B31.11 Slurry Transportation Piping Systems
B36.10 Welded and Seamless Wrought Pipe
B36.19 Stainless Steel Pipe
B73.1M Horizontal, End Suction Centrifugal Pumps
B73.2M Vertical In-line Centrifugal Pumps
B133.2 Basic Gas Turbine
B133.4 Gas Turbine Control and Protection Systems
LOS4C1 Flushing and Cleaning Gas Turbine Gen. Lube Systems
58 Standard for the Storage and Hauling of Liquefied Petroleum Gas
MC96.1 Temperature Measurement Thermocouples
2.2 API
Publ. 941 Steel for Hydrogen Service at Elevated Temperature and Pressures in Petroleum Refineries and Petrochemical Plants
Publ. 2009 Safe Welding and Cutting Practices in Refineries
Publ. 2015 Safe Entry and Cleaning of Petroleum Storage Tanks
Publ. 2021 Fighting Fires In and Around Flammable and Combustible Liquid Atmosphere Storage Tanks
Publ. 2030 Guidelines for Applications of Water Spray Systems for Fire Protection in the Petroleum Industry
Publ. 2517 Evaporation Loss from External Floating-Roof Tanks
Publ. 2557 Vapour Collection and Control Options for Storage and Transfer Operations in the Petroleum Industry
RP 14C Analysis, Design, Installation and Testing of Basic Surface Safety Systems on Offshore Platforms
RP 14F Design and Installation of Offshore Platforms
RP 14G Fire Prevention and Control on Open Type Offshore Production Platforms
RP 30 Calculation for Heater Tube Thickness in Petroleum Refineries
RP 500 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities
RP 520 Sizing, Selection, and Installation of Pressure Delivery Devices in Refineries. Parts 1 and 2
RP 521 Guide for Pressure Delivery and Depressuring Systems
RP 526 Flanged Steel Safety Relief Valves
RP 551 Process Measurement Instrumentation
RP 560 Fired Heater for General Refinery Services
RP 651 Cathodic Protection of Aboveground Petroleum Storage Tanks
RP 652 Lining of Aboveground Storage Tank Bottoms
RP 682 Shaft Sealing System for Centrifugal and Rotary Pumps
RP 1110 Pressure Testing of Liquid Petroleum Pipelines
RP 2001 Fire Protection in Refineries
RP 2003 Protection Against Ignitions Arising out of Static, Lighting and Stray Currents
Spec. 5L Line Pipe
Spec. 6D Pipeline Valves
Spec. 6FA Fire Test for Valves
Spec. 12D Field Welded Tanks for Storage of Production Liquids
Spec. 12F Shop Welded Tanks for Storage of Production Liquids
Spec. 12J Oil and Gas Separators
Spec. 12K Indirect Type Oil Field Heaters
Spec. 12L Specification for Vertical and Horizontal Emulsion Treaters
Spec. 12P Specification for Fibreglass Reinforced Plastic Tanks
Std. 510 Pressure Vessel Inspection Code
Std. 526 Flanged Steel Safety - Relief Valves
Std. 527 Seat Tightness of Pressure Relief Valves
Std. 594 Wafer and Wafer-Lug Check Valves
Std. 598 Valve Inspection and Testing
Std. 599 Metal Plug Valves - Flanged and Butt-Welding Ends
Std. 600 Steel Gate Valves - Flanged and Butt-Welding Ends
Std. 602 Compact Steel Gate Valves - Flanged Threaded, Welding, and Extended-Body Ends
Std. 603 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
Std. 607 Fire Test for Soft-Seated Quarter-Turn Valves
Std. 608 Metal Ball Valves - Flanged and Butt-Welding Ends
Std. 609 Lug - and Wafer - Type Butterfly Valves
Std. 610 Centrifugal Pumps For Petroleum, Heavy Duty Chemical and Gas Industry Services
Std. 611 General Purpose Steam Turbines for Refinery Services
Std. 612 Special Purpose Steam Turbines for Refinery Services
Std. 613 Special Purpose Gear Units for Refinery Services
Std. 614 Lubrication, Shaft-Sealing and Control Oil Systems for Special Purpose Application
Std. 615 Sound Control of Mechanical Equipment for Refinery Services
Std. 616 Gas Turbines for Refinery Services
Std. 617 Centrifugal Compressors for General Refinery Services
Std. 618 Reciprocating Compressors for General Refinery Services
Std. 619 Rotary-Type Positive Displacement Compressors for General Refinery Services
Std. 620 Design and Construction of Large, Welded, Low Pressure Storage Tanks
Std. 630 Tube and Header Dimensions for Fired Heaters for Refinery Service
Std. 650 Welded Steel Tanks for Oil Storage
Std. 660 Heat Exchangers for General Refinery Service
Std. 661 Air-Cooled Heat Exchangers for General Refinery Service
Std. 670 Vibrations, Axial Position, and Bearing-Temperature Monitoring System
Std. 671 Special Purpose Coupling for Refinery Service
Std. 674 Positive Displacement Pumps - Reciprocating
Std. 675 Positive Displacement Pumps - Controlled Volume
Std. 676 Positive Displacement Pumps - Rotary
Std. 677 General Purpose Gear Units for Refineries Services
Std. 678 Accelerometer-Base Vibration Monitoring System
Std. 1104 Welding Pipelines and Related Facilities
Std. 2000 Venting Atmospheric and Low-Pressure Storage Tanks - Non-Refrigerated and Refrigerated
Std. 2530 Measurement Standard Chapter 14, Natural Gas
2.3 ASME
Boiler and Pressure Vessel Code
Section I Power Boilers
Section II Materials Specifications
Part A Ferrous Materials
Part B Non-Ferrous Materials
Part C Welding Rods, Electrodes and Filler Metal
Part D Properties
Section IV Heating Boilers
Section V Non-Destructive Examination
Section VIII Pressure Vessels - Division 1
Division 2
Section IX Welding and Brazing Qualifications
Section X Fibreglass-Reinforced Plastic Pressure Vessels
Standards
Std. 120 Gas Turbine Generator Lube Oil Systems
Performance Test Codes
PTC 1 General Instructions
PTC 2 Definitions and Values
PTC 4.1 Steam Generating Units
PTC 8.2 Centrifugal Pumps
PTC 9 Displacement Compressors, Vacuum Pumps and Blowers
PTC 10 Compressors and Exhausters
PTC 22 Gas Turbine Power Plants
2.4 ASHRAE
ASHRAE Handbooks
2.5 AWWA
C110 Gray-Iron and Ductile Iron Fittings, 3 in. through 48 in. for Water and Other Liquids
C151 Ductile Iron Pipe, Centrifugally Cast in Metal Molds or Sand-Lined Molds for Water and Other Liquids
E101-88 Vertical Turbine Pumps - Live Shaft and Submersible Types
C502 Dry Barrel Hydrants Fire Hydrants
2.6 CEMA
Belt Conveyors for Bulk Materials Handbook
2.7 CGSB
41-GP-22 Standard for Process Equipment Reinforced Polyester, Chemical Resistance, Custom-Contact Molded
2.8 CSA
B-51 Boilers and Pressure Vessels
B-53 Identification of Piping Systems
B-52-M Mechanical Refrigeration Code
B-63 Welded and Seamless Steel Pipe
B-137.3 Rigid Poly (Vinyl Chloride) (PVC) Pipe
B-137.4-M Polyethylene Piping Systems for Gas Service
W-48.1 Mild Steel Covered Arc-Welding Electrodes
W-48.3 Low-Alloy Steel Arc-Welding Electrodes
Z-183 Oil Pipeline Transportation Systems
Z-184-M Gas Pipeline Systems
Z-245.1 Pipeline Systems and Materials
Z-245.10 Wrought Steel Buttwelding Fittings and Flanges
Z-276-M LNG - Production, Storage and Handling
2.9 CTI
STD-103 Standard Specifications for the Design of Cooling Tower Structures with Redwood Lumber
STD-111 Gear Speed Reducers
STD-114 Standard Specifications for the Design of Cooling Tower Structures with Douglas Fir Lumber
NCL-109 Nomenclature for Industrial Water - Cooling Towers
WMS-112 Pressure Preservative Treatment of Lumber for Industrial Water - Cooling Towers
ATC-105 Acceptable Test Code for Water-Cooling Towers
2.10 Hydraulics Institute
Standards for Centrifugal, Vertical, Rotary and Reciprocating Pumps
2.11 MSS
Standard Practices
SP-6 Standard Finishes for Contact Faces Pipe Flanges and Connecting End Flanges of Valves and Fittings
SP-25 Standard Marking System for Valves, Fittings, Flanges and Union
SP-44 Steel Pipeline Flanges
SP-53 Quality Standards for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components - Mag. Particle
SP-54 Quality Standards for Steel Castings and for Valves, Flanges and Fittings and Other Piping Components - Radiographic
SP-55 Quality Standards for Steel Castings and for Valves, Flanges and Fittings and Other Piping Components - Visual
SP-58 Pipe Hangers and Supports - Material, Design and Manufacture
SP-61 Pressure Testing of Steel Valves
SP-69 Pipe Hangers and Supports - Selection and Application
SP-75 High Test Wrought Butt Welding Fittings
SP-82 Valve Pressure Testing Methods
SP-89 Pipe Hangers and Supports - Fabrication and Installation Practices
2.12 NACE
MR-01-90 Sulfide Stress Cracking Resistant Metallic Material for Oil Field Equipment
RP-01-78 Design, Fabrication and Surface Finish of Metal Tanks and Vessels to be Lined for Chemical Immersion Service
RP-0188-88 Discontinuity (Holiday) Testing of Protective Coatings
2.13 NEMA
SM23-1979 Steam Turbines for Mechanical Drive Service
2.14 NFPA
11 Low Expansion Foam Systems
11A Medium and High Expansion Foam Systems
12 Carbon Dioxide Extinguishing Systems
12A Halon 1301 Fire Extinguishing Systems
12B Halon 1211 Fire Extinguishing Systems
13 Installation of Sprinkler Systems
14 Stand Pipe and Hose Systems
15 Water Spray Fixed Systems
16 Deluge Foam-Water Sprinkler and Spray Systems
17 Dry Chemical Extinguishing Systems
20 Centrifugal Fire Pumps
22 Water Tanks for Private Fire Protection
24 Installation of Private Fire Service Mains and Their Appurtenances
25 Water Based Fire Protection Systems
37 Stationary Combustion Engines and Gas Turbines
51 Oxygen-Fuel Gas Systems for Welding
54 National Fuel Gas Code
CUA 58 LP Gas Storage, Use
59 LP Gases at Utility Gas Plants
59A Storage and Handling of Liquefied Natural Gas
82 Incinerators, Waste and Linen Handling Systems and Equipment
214 Water Cooling Towers
291 Fire Flow Testing and Marking of Hydrants
655 Prevention of Sulphur Fires and Explosions
2.15 PFI
ES 4 Hydrostatic Testing of Fabricated Piping
ES 5 Cleaning of Fabricated Piping
ES 7 Minimum Length and Spacing for Welded Nozzles
ES 18 Ultrasonic Examination of Tubular Products
ES 22 Recommended Practice for Color Coding of Piping Materials
2.16 RMA
Conveyor and Elevator Belt Handbook
2.17 SSPC
PA1 Shop, Field and Maintenance Painting
SP1 Solvent Cleaning
SP5 White Metal Blast Cleaning
SP6 Commercial Blast Cleaning
SP7 Brush-Off Blast Cleaning
SP8 Pickling
SP10 Near-White Blast Cleaning
Guide to Vis1 Guide to Pictorial Surface Preparation Standards for Painting Steel
2.18 TEMA
TEMA Standard
2.19 ULC
S603M Standard for Shop Fabricated Steel Underground Tanks for Flammable and Combustible Liquids
S630M Standard for Shop Fabricated Steel Aboveground Tanks for Flammable and Combustible Liquids
2.20 ISA
85.1 Instrument Symbols and Identification
2.21 ISO
5167 Sizing of Metering Orifice
2.22 Offshore Pipeline
DNV Rules for Submarine Pipeline Systems
2.23 Units of Measurement
ISO 1000 SI Units
this are some applicable standards as tips however this document is old a decade! but may be helpful. just shearing.
Engineering Rocks!!!
1.0 LIST OF STANDARDS ORGANIZATIONS BY EQUIPMENT CATEGORIES
1.1 GENERAL
1.2 SAFETY
1.3 VESSELS - TANKS
1.4 HEAT TRANSFER EQUIPMENT
1.5 ROTATING EQUIPMENT
1.6 PROCESS EQUIPMENT
1.7 MATERIAL HANDLING
1.8 GENERAL SERVICES
1.9 PLANT SERVICES
1.10 BUILDING SERVICES
1.11 PLUMBING
1.12 PIPING
1.13 MISCELLANEOUS MATERIAL, WELDING, ETC.
2.0 LIST OF MAJOR CODES AND STANDARDS RELATED TO PROCESS ENGINEERING
2.1 ANSI
2.2 API
2.3 ASME
2.4 ASHRAE
2.5 AWWA
2.6 CEMA
2.7 CGSB
2.8 CSA
2.9 CTI
2.10 HYDRAULICS INSTITUTE
2.11 MSS
2.12 NACE
2.13 NEMA
2.14 NFPA
2.15 PFI
2.16 RMA
2.17 SSPC
2.18 TEMA
2.19 ULC
TABLE OF CONTENTS (CONTINUED)
2.20 ISA
2.21 ISO
2.22 OFFSHORE PIPELINE
2.23 UNITS OF MEASUREMENT
------------------------------------------------------------
1.0 LIST OF STANDARDS ORGANIZATIONS BY EQUIPMENT CATEGORIES
1.1 General
AGS American Gas Society
ANSI American National Standards Institute
BSI British Standards Institute
CGSB Canadian General Standards Board
CSA Canadian Standards Association
ISO International Organization for Standardization
NBS National Bureau of Standards
ISA Instrument Society of America
1.2 Safety
ANSI American National Standard Institute
Dept. of Labour
EPA Environment Protection Agency
FM Factory Mutual
NBFU National Board of Fire Underwriters
NFPA National Fire Protection Association
OSHA Occupational Safety and Health Administration
UL Underwriters' Laboratories
1.3 Vessels - Tanks
API American Petroleum Institute
ASME American Society of Mechanical Engineers
AWWA American Water Works Association
NBBI National Bureau of Boiler & Pressure Vessel Inspectors
ULC Underwriters' Laboratories of Canada
1.4 Heat Transfer Equipment
API American Petroleum Institute
CTI Cooling Tower Institute
TEMA Tubular Exchanger Manufacturers Association
1.5 Rotating Equipment
ANSI American National Standard Institute
API American Petroleum Institute
AWWA American Water Works Association
DEMA Diesel Engine Manufacturers Association
Hydraulics Institute
MPTA Mechanical Power Transmission Association
1.6 Process Equipment
AWWA American Water Works Association
GPSA Gas Processor Suppliers Association
API American Petroleum Institute
ASME American Society of Mechanical Engineers
ASTM American Society for Testing and Materials
ANSI American National Standards Institute
NBBI National Bureau of Boiler and Pressure Vessel Inspectors
CMAA Crane Equipment Manufacturers Association of America
1.7 Material Handling
CEMA Conveyor Equipment Manufacturers Association
CMAA Crane Equipment Manufacturers Association of America
CSA Canadian Standards Association
FEM Fédération Européenne de la Manutention (Rules for the Design of Hoisting Appliances)
MHI Material Handling Institute
RMA Rubber Manufacturers Association
1.8 General Services
SAMA Scientific Apparatus Makers Association
1.9 Plant Services
ACGIH American Conference of Governmental Industrial Hygienists
AGA American Gas Association
AWWA American Water Works Association
CAGI Compressed Air and Gas Institute
CGA Canadian Gas Association
CGA INC. Compressed Gas Association
1.10 Building Services
AMCA Air Moving and Conditioning Association
ARI Air-Conditioning and Refrigeration Institute
ASHRAE American Society of Heating, Refrigerating and Air-Conditioning Engineers
1.11 Plumbing
ASPE American Society of Plumbing Engineers
ASSE American Society of Sanitary Engineers
- Canadian Plumbing Code
PDI Plumbing and Drainage Institute
- Provincial Plumbing Code
1.12 Piping
API American Petroleum Institute
ASME American Society of Mechanical Engineers
MSS Manufacturers Standardization Society of the Valve and Fittings Industry
PFI Pipe Fabricators Institute
PPI Plastic Pipe Institute
1.13 Miscellaneous Material, Welding, etc.
ASME American Society of Mechanical Engineers
ASTM American Society for Testing and Materials
TIMA Thermal Insulation Manufacturers Association
2.0 LIST OF MAJOR CODES AND STANDARDS RELATED TO PROCESS ENGINEERING
2.1 ANSI
A1 Liquefied Petroleum Gas System
A13.1 Scheme for Identification of Piping Systems
B.16.1 Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800
B.16.5 Pipe Flanges and Fittings
B16.9 Steel Buttwelding Fittings
B31 Corrosion Control for B31.1
B31.1 Power Piping
B31.2 Fuel Gas Piping
B31.3 Chemical Plant and Petroleum Refinery Piping
B31.4 Liquid Petroleum Transportation Piping Systems
B31.5 Refrigeration Piping
B31.8 Gas Transmission and Distribution Systems (1982)
B31.11 Slurry Transportation Piping Systems
B36.10 Welded and Seamless Wrought Pipe
B36.19 Stainless Steel Pipe
B73.1M Horizontal, End Suction Centrifugal Pumps
B73.2M Vertical In-line Centrifugal Pumps
B133.2 Basic Gas Turbine
B133.4 Gas Turbine Control and Protection Systems
LOS4C1 Flushing and Cleaning Gas Turbine Gen. Lube Systems
58 Standard for the Storage and Hauling of Liquefied Petroleum Gas
MC96.1 Temperature Measurement Thermocouples
2.2 API
Publ. 941 Steel for Hydrogen Service at Elevated Temperature and Pressures in Petroleum Refineries and Petrochemical Plants
Publ. 2009 Safe Welding and Cutting Practices in Refineries
Publ. 2015 Safe Entry and Cleaning of Petroleum Storage Tanks
Publ. 2021 Fighting Fires In and Around Flammable and Combustible Liquid Atmosphere Storage Tanks
Publ. 2030 Guidelines for Applications of Water Spray Systems for Fire Protection in the Petroleum Industry
Publ. 2517 Evaporation Loss from External Floating-Roof Tanks
Publ. 2557 Vapour Collection and Control Options for Storage and Transfer Operations in the Petroleum Industry
RP 14C Analysis, Design, Installation and Testing of Basic Surface Safety Systems on Offshore Platforms
RP 14F Design and Installation of Offshore Platforms
RP 14G Fire Prevention and Control on Open Type Offshore Production Platforms
RP 30 Calculation for Heater Tube Thickness in Petroleum Refineries
RP 500 Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities
RP 520 Sizing, Selection, and Installation of Pressure Delivery Devices in Refineries. Parts 1 and 2
RP 521 Guide for Pressure Delivery and Depressuring Systems
RP 526 Flanged Steel Safety Relief Valves
RP 551 Process Measurement Instrumentation
RP 560 Fired Heater for General Refinery Services
RP 651 Cathodic Protection of Aboveground Petroleum Storage Tanks
RP 652 Lining of Aboveground Storage Tank Bottoms
RP 682 Shaft Sealing System for Centrifugal and Rotary Pumps
RP 1110 Pressure Testing of Liquid Petroleum Pipelines
RP 2001 Fire Protection in Refineries
RP 2003 Protection Against Ignitions Arising out of Static, Lighting and Stray Currents
Spec. 5L Line Pipe
Spec. 6D Pipeline Valves
Spec. 6FA Fire Test for Valves
Spec. 12D Field Welded Tanks for Storage of Production Liquids
Spec. 12F Shop Welded Tanks for Storage of Production Liquids
Spec. 12J Oil and Gas Separators
Spec. 12K Indirect Type Oil Field Heaters
Spec. 12L Specification for Vertical and Horizontal Emulsion Treaters
Spec. 12P Specification for Fibreglass Reinforced Plastic Tanks
Std. 510 Pressure Vessel Inspection Code
Std. 526 Flanged Steel Safety - Relief Valves
Std. 527 Seat Tightness of Pressure Relief Valves
Std. 594 Wafer and Wafer-Lug Check Valves
Std. 598 Valve Inspection and Testing
Std. 599 Metal Plug Valves - Flanged and Butt-Welding Ends
Std. 600 Steel Gate Valves - Flanged and Butt-Welding Ends
Std. 602 Compact Steel Gate Valves - Flanged Threaded, Welding, and Extended-Body Ends
Std. 603 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
Std. 607 Fire Test for Soft-Seated Quarter-Turn Valves
Std. 608 Metal Ball Valves - Flanged and Butt-Welding Ends
Std. 609 Lug - and Wafer - Type Butterfly Valves
Std. 610 Centrifugal Pumps For Petroleum, Heavy Duty Chemical and Gas Industry Services
Std. 611 General Purpose Steam Turbines for Refinery Services
Std. 612 Special Purpose Steam Turbines for Refinery Services
Std. 613 Special Purpose Gear Units for Refinery Services
Std. 614 Lubrication, Shaft-Sealing and Control Oil Systems for Special Purpose Application
Std. 615 Sound Control of Mechanical Equipment for Refinery Services
Std. 616 Gas Turbines for Refinery Services
Std. 617 Centrifugal Compressors for General Refinery Services
Std. 618 Reciprocating Compressors for General Refinery Services
Std. 619 Rotary-Type Positive Displacement Compressors for General Refinery Services
Std. 620 Design and Construction of Large, Welded, Low Pressure Storage Tanks
Std. 630 Tube and Header Dimensions for Fired Heaters for Refinery Service
Std. 650 Welded Steel Tanks for Oil Storage
Std. 660 Heat Exchangers for General Refinery Service
Std. 661 Air-Cooled Heat Exchangers for General Refinery Service
Std. 670 Vibrations, Axial Position, and Bearing-Temperature Monitoring System
Std. 671 Special Purpose Coupling for Refinery Service
Std. 674 Positive Displacement Pumps - Reciprocating
Std. 675 Positive Displacement Pumps - Controlled Volume
Std. 676 Positive Displacement Pumps - Rotary
Std. 677 General Purpose Gear Units for Refineries Services
Std. 678 Accelerometer-Base Vibration Monitoring System
Std. 1104 Welding Pipelines and Related Facilities
Std. 2000 Venting Atmospheric and Low-Pressure Storage Tanks - Non-Refrigerated and Refrigerated
Std. 2530 Measurement Standard Chapter 14, Natural Gas
2.3 ASME
Boiler and Pressure Vessel Code
Section I Power Boilers
Section II Materials Specifications
Part A Ferrous Materials
Part B Non-Ferrous Materials
Part C Welding Rods, Electrodes and Filler Metal
Part D Properties
Section IV Heating Boilers
Section V Non-Destructive Examination
Section VIII Pressure Vessels - Division 1
Division 2
Section IX Welding and Brazing Qualifications
Section X Fibreglass-Reinforced Plastic Pressure Vessels
Standards
Std. 120 Gas Turbine Generator Lube Oil Systems
Performance Test Codes
PTC 1 General Instructions
PTC 2 Definitions and Values
PTC 4.1 Steam Generating Units
PTC 8.2 Centrifugal Pumps
PTC 9 Displacement Compressors, Vacuum Pumps and Blowers
PTC 10 Compressors and Exhausters
PTC 22 Gas Turbine Power Plants
2.4 ASHRAE
ASHRAE Handbooks
2.5 AWWA
C110 Gray-Iron and Ductile Iron Fittings, 3 in. through 48 in. for Water and Other Liquids
C151 Ductile Iron Pipe, Centrifugally Cast in Metal Molds or Sand-Lined Molds for Water and Other Liquids
E101-88 Vertical Turbine Pumps - Live Shaft and Submersible Types
C502 Dry Barrel Hydrants Fire Hydrants
2.6 CEMA
Belt Conveyors for Bulk Materials Handbook
2.7 CGSB
41-GP-22 Standard for Process Equipment Reinforced Polyester, Chemical Resistance, Custom-Contact Molded
2.8 CSA
B-51 Boilers and Pressure Vessels
B-53 Identification of Piping Systems
B-52-M Mechanical Refrigeration Code
B-63 Welded and Seamless Steel Pipe
B-137.3 Rigid Poly (Vinyl Chloride) (PVC) Pipe
B-137.4-M Polyethylene Piping Systems for Gas Service
W-48.1 Mild Steel Covered Arc-Welding Electrodes
W-48.3 Low-Alloy Steel Arc-Welding Electrodes
Z-183 Oil Pipeline Transportation Systems
Z-184-M Gas Pipeline Systems
Z-245.1 Pipeline Systems and Materials
Z-245.10 Wrought Steel Buttwelding Fittings and Flanges
Z-276-M LNG - Production, Storage and Handling
2.9 CTI
STD-103 Standard Specifications for the Design of Cooling Tower Structures with Redwood Lumber
STD-111 Gear Speed Reducers
STD-114 Standard Specifications for the Design of Cooling Tower Structures with Douglas Fir Lumber
NCL-109 Nomenclature for Industrial Water - Cooling Towers
WMS-112 Pressure Preservative Treatment of Lumber for Industrial Water - Cooling Towers
ATC-105 Acceptable Test Code for Water-Cooling Towers
2.10 Hydraulics Institute
Standards for Centrifugal, Vertical, Rotary and Reciprocating Pumps
2.11 MSS
Standard Practices
SP-6 Standard Finishes for Contact Faces Pipe Flanges and Connecting End Flanges of Valves and Fittings
SP-25 Standard Marking System for Valves, Fittings, Flanges and Union
SP-44 Steel Pipeline Flanges
SP-53 Quality Standards for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components - Mag. Particle
SP-54 Quality Standards for Steel Castings and for Valves, Flanges and Fittings and Other Piping Components - Radiographic
SP-55 Quality Standards for Steel Castings and for Valves, Flanges and Fittings and Other Piping Components - Visual
SP-58 Pipe Hangers and Supports - Material, Design and Manufacture
SP-61 Pressure Testing of Steel Valves
SP-69 Pipe Hangers and Supports - Selection and Application
SP-75 High Test Wrought Butt Welding Fittings
SP-82 Valve Pressure Testing Methods
SP-89 Pipe Hangers and Supports - Fabrication and Installation Practices
2.12 NACE
MR-01-90 Sulfide Stress Cracking Resistant Metallic Material for Oil Field Equipment
RP-01-78 Design, Fabrication and Surface Finish of Metal Tanks and Vessels to be Lined for Chemical Immersion Service
RP-0188-88 Discontinuity (Holiday) Testing of Protective Coatings
2.13 NEMA
SM23-1979 Steam Turbines for Mechanical Drive Service
2.14 NFPA
11 Low Expansion Foam Systems
11A Medium and High Expansion Foam Systems
12 Carbon Dioxide Extinguishing Systems
12A Halon 1301 Fire Extinguishing Systems
12B Halon 1211 Fire Extinguishing Systems
13 Installation of Sprinkler Systems
14 Stand Pipe and Hose Systems
15 Water Spray Fixed Systems
16 Deluge Foam-Water Sprinkler and Spray Systems
17 Dry Chemical Extinguishing Systems
20 Centrifugal Fire Pumps
22 Water Tanks for Private Fire Protection
24 Installation of Private Fire Service Mains and Their Appurtenances
25 Water Based Fire Protection Systems
37 Stationary Combustion Engines and Gas Turbines
51 Oxygen-Fuel Gas Systems for Welding
54 National Fuel Gas Code
CUA 58 LP Gas Storage, Use
59 LP Gases at Utility Gas Plants
59A Storage and Handling of Liquefied Natural Gas
82 Incinerators, Waste and Linen Handling Systems and Equipment
214 Water Cooling Towers
291 Fire Flow Testing and Marking of Hydrants
655 Prevention of Sulphur Fires and Explosions
2.15 PFI
ES 4 Hydrostatic Testing of Fabricated Piping
ES 5 Cleaning of Fabricated Piping
ES 7 Minimum Length and Spacing for Welded Nozzles
ES 18 Ultrasonic Examination of Tubular Products
ES 22 Recommended Practice for Color Coding of Piping Materials
2.16 RMA
Conveyor and Elevator Belt Handbook
2.17 SSPC
PA1 Shop, Field and Maintenance Painting
SP1 Solvent Cleaning
SP5 White Metal Blast Cleaning
SP6 Commercial Blast Cleaning
SP7 Brush-Off Blast Cleaning
SP8 Pickling
SP10 Near-White Blast Cleaning
Guide to Vis1 Guide to Pictorial Surface Preparation Standards for Painting Steel
2.18 TEMA
TEMA Standard
2.19 ULC
S603M Standard for Shop Fabricated Steel Underground Tanks for Flammable and Combustible Liquids
S630M Standard for Shop Fabricated Steel Aboveground Tanks for Flammable and Combustible Liquids
2.20 ISA
85.1 Instrument Symbols and Identification
2.21 ISO
5167 Sizing of Metering Orifice
2.22 Offshore Pipeline
DNV Rules for Submarine Pipeline Systems
2.23 Units of Measurement
ISO 1000 SI Units
European Standards (abbreviated ENs owing to the more literal translation from French/German as European Norms[1][2]) are technical standards drafted and maintained by CEN (European Committee for Standardization), CENELEC (European Committee for Electrotechnical Standardization) and ETSI (European Telecommunications Standards Institute).
This is a list of published International Organization for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards are protected by copyright and most of them must be purchased.
EN 1â999[edit]
- EN 1: Fluid oil stoves with vaporizing burners
- EN 2: Classification of fire
- EN 3: Portable fire extinguishers
- EN 19: Industrial valves â Marking of metallic valves
- EN 26: Gas-fired instantaneous water heaters for the production of domestic hot water
- EN 40-1: Lighting columns - Part 1: Definitions and terms
- EN 40-2: Lighting columns - Part 2: General requirements and dimensions
- EN 40-3-1: Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads
- EN 40-3-2: Lighting columns - Part 3-2: Design and verification - Verification by testing
- EN 40-3-3: Lighting columns - Part 3-3: Design and verification - Verification by calculation
- EN 40-4: Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
- EN 40-5: Lighting columns - Part 5: Requirements for steel lighting columns
- EN 40-6: Lighting columns - Part 6: Requirements for aluminium lighting columns
- EN 40-7: Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns
- EN 54: Fire detection and fire alarm systems
- EN 71: Safety of toys
- EN 81: Safety of lifts
- EN 115: Safety of escalators & Moving walks
- EN 166: Personal eye protection. Specifications
- EN 196: Methods for testing cement (10 parts)
- EN 197-1: Cement â Part 1 : Composition, specifications and conformity criteria for common cements
- EN 197-2: Cement â Part 2 : Conformity evaluation
- EN 206-1: Concrete â Part 1: Specification, performance, production and conformity
- EN 207: Classification and specifications of filters and eye protection against laser
- EN 208: Classification of eye protection filters for laser alignment
- EN 228: Specifications for automotive petrol
- EN 250: Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
- EN 280: Mobile elevating work platforms. Design calculations, Stability criteria, Construction, Safety Examinations and tests
- EN 287-1: 'Qualification test of welders â Fusion welding â Part 1: Steels' (2011)
- EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs
- EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
- EN 336: Structural timber â Sizes, permitted deviations
- EN 338: Structural timber â Strength classes
- EN 341: Personal protective equipment against falls from a height. Descender devices
- EN 352-2: Revised 2002 standards on hearing protectors. Safety requirements and testing, generally about earplugs.
- EN 353-1: Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor
- EN 353-2: Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line
- EN 354: Personal protective equipment against falls from a height. Lanyards
- EN 355: Personal protective equipment against falls from a height. Energy absorbers
- EN 358: Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
- EN 360: Personal protective equipment against falls from a height. Retractable type fall arresters
- EN 361: Personal protective equipment against falls from a height. Full body harnesses
- EN 362: Personal protective equipment against falls from a height. Connectors
- EN 363: Personal protective equipment against falls from a height. Fall arrest systems
- EN 374: Protective gloves against chemicals and micro-organisms
- EN 381: Protective clothing for chainsaw users, e.g. trousers, jackets, gloves, boots/gaiters.
- EN 386: Glued laminated timber - Performance requirements and minimum production requirements
- EN 388: Protective gloves against mechanical risks
- EN 390: Glued laminated timber. Sizes. Permissible deviations
- EN 391: Glued laminated timber - Delamination tests of glue lines
- EN 392: Glued laminated timber - Shear test of glue lines
- EN 397: Specification for industrial safety helmets
- EN 403: Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking.
- EN 408: Structural timber and glued laminated timber â Determination of some physical and mechanical properties
- EN 417: Non-refillable metallic cartridges for liquefied petroleum gases
- EN 420: Protective gloves. General requirements and test methods
- EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins.
- EN 440: 'Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel - Classification' (1994)
- EN 450: Fly ash for concrete - Definitions, requirements and quality control
- EN 474: Earth-moving Machinery. Safety. General Requirements
- EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1)
- EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN 14081-1)
- EN 567: Mountaineering equipment. Rope clamps. Safety requirements and test methods
- EN 590: Specification for automotive diesel
- EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems
- EN 716: Children's cots and folding cots for domestic use
- EN 795: Protection against falls from a height. Anchor devices. Requirements and testing
- EN 805: Water supply. Requirements for systems and components outside buildings
- EN 813: Personal protective equipment for prevention of falls from a height. Sit harnesses
- EN 837: Pressure connections
- EN 840: Mobile waste containers.
- EN 877: Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance
- EN 926-1: Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength
- EN 926-2: Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics
- EN 933-1: Test for geometrical properties of aggregates - Part 1: determination of particle size distribution - Sieving method
- EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions and requirements
- EN 980: Symbols for use in the labeling of medical devices
EN 1000â1989[edit]
![Iso Standards List Iso Standards List](/uploads/1/2/5/0/125029351/835757889.jpg)
- EN 1010-1: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements
- EN 1010-2: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and varnishing machines including pre-press machinery
- EN 1010-3: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines
- EN 1010-4: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Bookbinding, paper converting and finishing machines
- EN 1010-5: Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines. Machines for the production of corrugated board
- EN 1069: Water slides of 2 m height and more
- EN 1078: Helmets for pedal cyclists and for users of skateboards and roller skates
- EN 1090: Execution of steel structures and aluminium structures (3 parts)
- EN 1092: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
- EN 1168: Precast concrete products - Hollow core slabs
- EN 1176-1: Playground equipment. General safety requirements and test methods
- EN 1177: Impact absorbing playground surfacing. Safety requirements and test methods
- EN 1325-1: Vocabulary of Value Management, Value Evaluation and Functional Analysis
- EN 1337: Structural bearings
- EN 1399: Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes
- EN 1401: Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U)
- EN 1496: Personal fall protection equipment. Rescue lifting devices
- EN 1679: Reciprocating internal combustion engines: Compression ignition engines
- EN 1809: Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.
- EN 1815: Resilient and textile floor coverings. Assessment of static electrical propensity
- EN 1891: Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes
- EN 1972: Diving equipment - Snorkels - Requirements and test methods
Iso Standards List In India
EN 1990â1999 (Eurocodes)[edit]
- EN 1990: (Eurocode 0) Basis of structural design
- EN 1991: (Eurocode 1) Actions on structures
- EN 1992: (Eurocode 2) Design of concrete structures
- EN 1993: (Eurocode 3) Design of steel structures
- EN 1994: (Eurocode 4) Design of composite steel and concrete structures
- EN 1995: (Eurocode 5) Design of timber structures
- EN 1996: (Eurocode 6) Design of masonry structures
- EN 1997: (Eurocode 7) Geotechnical design
- EN 1998: (Eurocode 8) Design of structures for earthquake resistance
- EN 1999: (Eurocode 9) Design of aluminium structures
EN 10000â10999[edit]
This range includes almost exclusively CEN Standards related to iron and steel. Open office free download for windows 8.1 32 bit.
- EN 10002: Metallic Materials - Tensile Testing
- EN 10002-1: Method of Test at Ambient Temperature
- EN 10025: Hot rolled products of structural steels
- EN 10025-1: Part 1: General technical delivery conditions
- EN 10025-2: Part 2: Technical delivery conditions for non-alloy structural steels
- EN 10025-3: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
- EN 10025-4: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
- EN 10025-5: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- EN 10025-6:Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
- EN 10027: Designation systems for steel.[3]
- EN 10204: Metallic products - Types of inspection documents
- EN 10216: Seamless steel tubes for pressure purposes
- EN 10216-1: Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10216-2: Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties
- EN 10216-3: Part 3: Alloy fine grain steel tubes
- EN 10216-4: Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
- EN 10216-5: Part 5: Stainless steel tubes
- EN 10217: Welded steel tubes for pressure purposes
- EN 10217-1: Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10217-2: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- EN 10217-3: Part 3: Alloy fine grain steel tubes
- EN 10217-4: Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
- EN 10240: Internal and/or external protective coating for steel tubes - specification for hot dip galvanized coatings applied in automatic plants
EN | Title | Status |
---|---|---|
10357-A | Hygienic and aseptic stainless steel tubes, fittings and connections for food, pharmaceutical and chemical industries | Active |
EN 11000â49999[edit]
Iso Standards 2019
- EN 12102: Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
- EN 12103: Resilient floor coverings - Agglomerated cork underlays - specification
- EN 12104: Resilient floor coverings - Cork floor tiles - Specification
- EN 12105: Resilient floor coverings - Determination of moisture content of agglomerated composition cork
- EN 12199: Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
- EN 12221: Changing units for domestic use
- EN 12246: Quality classification of timber used in pallets and packaging
- EN 12255: Wastewater treatment plants
- EN 12255-1: Part 1: General construction principles
- EN 12255-2: Part 2: Performance requirements of raw wastewater pumping installations
- EN 12255-3: Part 3: Preliminary treatment
- EN 12255-4: Part 4: Primary settlement
- EN 12255-5: Part 5: Lagooning processes
- EN 12255-6: Part 6: Activated sludge process
- EN 12255-7: Part 7: Biological fixed-film reactors
- EN 12255-8: Part 8: Sludge treatment and storage
- EN 12255-9: Part 9: Odour control and ventilation
- EN 12255-10: Part 10: Safety principles
- EN 12255-11: Part 11: General data required
- EN 12255-12: Part 12: Control and automation
- EN 12255-13: Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation
- EN 12255-14: Part 14: Disinfection
- EN 12255-15: Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
- EN 12255-16: Part 16: Physical (mechanical) filtration
- EN 12277: Mountaineering and climbing harnesses
- EN 12281: Printing and business paper. Requirements for copy paper.
- EN 12345: Welding. Multilingual terms for welded joints with illustrations
- EN 12492: Helmets for mountaineering
- EN 12566: Small wastewater treatment systems for up to 50 PT
- EN 12566-1: Part 1: Prefabricated septic tanks
- EN 12566-2: Part 2: Soil infiltration systems
- EN 12566-3: Part 3: Packaged and/or site assembled domestic wastewater treatment plants
- EN 12566-4: Part 4: Septic tanks assembled in situ from prefabricated kits
- EN 12566-5: Part 5: Pretreated Effluent Filtration systems
- EN 12566-6: Part 6: Prefabricated treatment units for septic tank effluent
- EN 12566-7: Part 7: Prefabricated tertiary treatment units
- EN 12572: Artificial climbing structures
- EN 12600: Classification of Resistance of Glazing to Impact
- EN 12663: Railway applications - Structural requirements of railway vehicle bodies
- EN 12797: Brazing â Destructive tests of brazed joints
- EN 12799: Brazing â Non-destructive examination brazed joints
- EN 12810: Facade scaffolds made of prefabricated parts
- EN 12811: Temporary works equipment
- EN 12841: Personal fall protection equipment. Rope access systems. Rope adjustment devices
- EN 12890: Patterns, pattern equipment and coreboxes for the production of sand molds and sand cores
- EN 12952: Water-Tube Boilers And Auxiliary Installations
- EN 12973: Value Management
- EN 12975-1: Thermal solar systems and components - Solar collectors
- EN 13000: Cranes - Mobile Cranes
- EN 13133: 'Brazing - Brazer approval' (2000)
- EN 13145: Railway applications - Track - Wood sleepers and bearers
- EN 13146: Railway applications - Track - Test methods for fastening systems
- EN 13162:2013-03: Thermal insulation products for buildings - Factory made mineral wool (MW) products
- EN 13204: Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements[4]
- EN 13300: quality and classification of (interior) wall paint
- EN 13309: Construction machinery - Electromagnetic compatibility of machines with internal power supply
- EN 13319: Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods.
- EN 13402: Size designation of clothes
- EN 13432: Compostable and biodegradablepackaging
- EN 13445: Unfired pressure vessels
- EN 13480: Metallic industrial piping
- EN 13501: Fire classification of construction products and building elements
- EN 13537: Temperature ratings for sleeping bags
- EN 13594:2002: Protective gloves for professional motorcycle riders. Requirements and test methods
- EN 13595-1:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General requirements
- EN 13595-2:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of impact abrasion resistance
- EN 13595-3:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of burst strength.
- EN 13595-4:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test methods for the determination of impact cut resistance
- EN 13612: Performance evaluation of in-vitro diagnostic devices
- EN 13634:2002: Protective footwear for professional motorcycle riders. Requirements and test methods
- EN 13640: Stability testing of in vitro diagnostic reagents
- EN 13757: Communication system for meters and remote reading of meters (Meter-Bus)
- EN 13940:2016: System of concepts to support continuity of care
- EN ISO 13982: Protective clothing for use against solid particulates â Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
- EN 14081-1: Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
- EN 14081-2: Timber structures â Strength graded structural timber with rectangular cross section â Part 2 : Machine grading; additional requirements for initial type testing.
- EN 14081-3:Timber structures â Strength graded structural timber with rectangular cross section â Part 3: Machine grading; additional requirements for factory production control.
- EN 14081-4:Timber structures â Strength graded structural timber with rectangular cross section â Part 4: Machine grading; grading machine settings for machine controlled systems.
- EN 14214: The pure biodiesel standard
- EN 14225-1: Diving suits. Wet suits. Requirements and test methods.
- EN 14225-2: Diving suits. Dry suits. Requirements and test methods.
- EN 14511: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling
- EN 14904: Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
- EN 14988-1:2006: Children's High chairs. Part 1: Safety requirements
- EN 14988-2:2006: Children's High chairs. Part 2: Test methods
- EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings- addressing indoor air quality, thermal environment, lighting and acoustics
- EN 15531: Service Interface for Real Time Information
- EN 15595: Railway applications - Braking - Wheel slip prevention equipment [5]
- EN 15714: Industrial Valves - Actuators
- EN 15744: Film identification â Minimum set of metadata for cinematographic works
- EN 15838: Customer Contact Centres - Requirements for service provision
- EN 15883: Washer-disinfectors
- EN 15907: Film identification â Enhancing interoperability of metadata - Element sets and structures
- EN 16001: Energy management systems; withdrawn, replaced by ISO 50001
- EN 16034: Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
- EN 16114: Management consultancy services
- EN 16228: Drilling and foundation equipment â Safety
- EN 16228-1: Common requirements
- EN 16228-2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
- EN 16228-3: Horizontal directional drilling equipment (HDD)
- EN 16228-4: Foundation equipment
- EN 16228-5: Diaphragm walling equipment
- EN 16228-6: Jetting, grouting and injection equipment
- EN 16228-7: Interchangeable auxiliary equipment
- EN 16247: Energy audits
- EN 16804: Diving equipment - Diving open heel fins - Requirements and test methods
- EN 16805: Diving equipment - Diving mask - Requirements and test methods
- EN 16931-1: Electronic Invoicing - Semantic data model of the core elements of an electronic invoice
- EN 20345: Personal Protective Equipment â Safety Footwear
- EN 28601: Data elements and interchange formats; information interchange; representation of dates and times
- EN 45502-1: Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer
- EN 45545: Railway applications. Fire protection on railway vehicles.
- EN 45545-1: Railway applications. Fire protection on railway vehicles. General
- EN 45545-2: Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components
- EN 45545-3: Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
- EN 45545-4: Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design
- EN 45545-5: Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
- EN 45545-6: Railway applications. Fire protection on railway vehicles. Fire control and management systems
- EN 45545-7: Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
EN 50000â59999 (CEN specific, non-IEC electrical standards)[edit]
Types Of Iso Certifications
- EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage switchgear (DIN rail)
- EN 50075: Europlug
- EN 50090: Home and Building Electronic Systems (KNX/EIB)
- EN 50102: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts
- EN 50119: Railway applications - Fixed installations: Electric traction overhead contact lines for railways
- EN 50121: Railway applications - Electromagnetic compatibility
- EN 50121-1: Railway applications - Electromagnetic compatibility Part 1: General
- EN 50121-2: Railway applications - Electromagnetic compatibility - Part 2 : emission of the whole railway system to the outside world
- EN 50121-3-1: Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle
- EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3-2 : rolling stock - Apparatus
- EN 50121-4: Railway applications - Electromagnetic compatibility - Part 4 : emission and immunity of the signaling and telecommunications apparatus
- EN 50121-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
- EN 50122: Railway applications - Fixed installations
- EN 50122-1: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
- EN 50122-2: Railway applications - Fixed installations - Part 2: Protective provisions against the effects of Stray currents caused by d.c. traction systems
- EN 50122-3: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems
- EN 50123: Railway applications - Fixed installations - D.C. switchgear
- EN 50124: Railway applications - Insulation coordination
- EN 50125-2: Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
- EN 50125-3: Railway applications - Environmental conditions for equipment - Part 3: Equipment for signaling and telecommunications
- EN 50126: Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
- EN 50128: Railway applications - Communications, signaling and processing systems
- EN 50129: Railway applications - Communications, signaling and processing systems - Safety related electronic systems for signaling
- EN 50130: Alarm systems - Electromagnetic compatibility and Environmental test methods
- EN 50131: Alarm systems - Intrusion and hold-up systems
- EN 50136: Alarm systems - Alarm transmission systems
- EN 50153: Railway applications - Rolling stock - Protective provisions relating to electrical hazards
- EN 50155: Railway applications - Electronic equipment used on rolling stock
- EN 50157: Domestic and Similar Electronic Equipment Interconnection Requirements (Part1 = AV.link)
- EN 50158: Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
- EN 50159: Railway applications - Communication, signaling and processing systems - Safety-related communication in transmission systems
- EN 50159-1: Railway applications - Communication, signaling and processing systems - Part 1: Safety-related communication in closed transmission systems
- EN 50159-2: Railway applications - Communication, signaling and processing systems - Part 2: Safety-related communication in open transmission systems
- EN 50163: railway applications supply voltages of traction systems
- EN 50178: Electronic equipment for use in power installations
- EN 50262: Metric cable glands
- EN 50267: Corrosive Gases
- EN 50272-1: Standards for Safety requirements for secondary batteries and battery installations - Part 1 General safety information
- EN 50272-2: Standards for Safety requirements for secondary batteries and battery installations - Part 2 Stationary batteries
- EN 50522: Earthing of power installations exceeding 1 kV a.c.
- EN 50308: Wind Turbines - Protective Measures - Requirements for design, operation and maintenance
- EN 50325: Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
- EN 50412: Power line communication apparatus and systems used in low-voltage installations in the frequency range 1.6 MHz to 30 MHz
- EN 50436: Alcohol interlocks
- EN 50525: Low voltage energy cables; a merger of HD 21 and HD 22.
- EN 50600: Information technology - Data centre facilities and infrastructures
- EN 55014: Electromagnetic compatibility â Requirements for household appliances, electric tools and similar apparatus
- EN 55022: Information technology equipment. Radio disturbance characteristics.
- EN 55024: Information technology equipment. Immunity characteristics
EN 60000-69999 (CEN editions of IEC standards)[edit]
- EN 60065: Audio, Video and similar electronics apparatus - Safety requirements.
- EN 60950-1: Information technology equipment - Safety - Part1: General requirements
- EN 60950-21: Information technology equipment - Safety - Part21: Remote power feeding
- EN 60950-22: Information technology equipment - Safety - Part22: Equipment installed outdoors
- EN 60950-23: Information technology equipment - Safety - Part23: Large data storage equipment
- EN 61000-1-2: Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
- EN 61000-1-3: Electromagnetic compatibility (EMC). General. The effects of high-altitude EMP (HEMP) on civil equipment and systems
- EN 61000-1-4: Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
- EN 61000-1-5: Electromagnetic compatibility (EMC). General. High power electromagnetic (HPEM) effects on civil systems
- EN 61000-1-6: Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
- EN 61000-2-2: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems
- EN 61000-2-4: Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances
- EN 61000-2-9: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Radiated disturbance. Basic EMC publication
- EN 61000-2-10: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance
- EN 61000-2-12: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems
- EN 61000-3-2: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
- EN 61000-3-3: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ⤠16 A per phase and not subject to conditional connection
- EN 61000-3-11: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ⤠75 A and subject to conditional connection
- EN 61000-3-12: Electromagnetic compatibility (EMC). Limits.
- EN 61000-4-1: Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
- EN 61000-4-2: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication
- EN 61000-4-3: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test
- EN 61000-4-4: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test
- EN 61000-4-5: Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
- EN 61000-4-6: Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
- EN 61000-4-7: Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
- EN 61000-4-8: Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication
- EN 61000-4-11: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
- EN 61000-4-12: Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication
- EN 61000-4-13: Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity tests
- EN 61000-4-14: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
- EN 61000-4-15: Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication
- EN 61000-4-16: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
- EN 61000-4-17: Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
- EN 61000-4-18: Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test
- EN 61000-4-19: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signaling in the frequency range 2 kHz to 150 kHz at a.c. power ports
- EN 61000-4-20: Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
- EN 61000-4-21: Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
- EN 61000-4-22: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)
- EN 61000-4-23: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
- EN 61000-4-24: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
- EN 61000-4-25: Electromagnetic compatibility (EMC). Testing and measurement techniques. HEMP immunity test methods for equipment and systems
- EN 61000-4-27: Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
- EN 61000-4-28: Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
- EN 61000-4-29: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests. Basic EMC Publication.
- EN 61000-4-30: Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Power quality measurement methods
- EN 61000-4-34: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
- IEC 61000-5-1 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. General considerations. Basic EMC publication
- EN 61000-5-5 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
- EN 61000-5-7 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code). Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)
- EN 61000-6-1 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
- EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
- EN 61000-6-3 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
- EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
- EN 62061 /IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
Moreover, there are a lot of ISO and IEC standards that were accepted as 'European Standard' (headlined as EN ISO xxxxx) and are valid in the European Economic Region.
See also[edit]
- Institute for Reference Materials and Measurements (IRMM)
References[edit]
Current Iso Standards List
- ^Paul Cook (2002). Commentary on IEE Wiring Regulations 16th Edition, BS 7671 : 2001: Requirements for Electrical Installations Including Amendment No. 1 : 2002. IET. p. 2. ISBN978-0-85296-237-4.
- ^Hermann J. Koch (2017). Practical Guide to International Standardization for Electrical Engineers: Impact on Smart Grid and e-Mobility Markets. Wiley. p. 90. ISBN978-1-119-06743-6.
- ^Bringas, John E. (2004), Handbook of Comparative World Steel Standards: Third Edition(PDF) (3rd. ed.), ASTM International, p. 18, ISBN0-8031-3362-6
- ^'BS EN 13204:2004 - Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements â BSI British Standards'. Retrieved 2011-11-12.
- ^DIN.de
External links[edit]
Wikimedia Commons has media related to EN standards. |
Retrieved from 'https://en.wikipedia.org/w/index.php?title=List_of_EN_standards&oldid=917559116'